Ford Fiesta ST Forum banner

2014 Ford Fiesta ST project

44051 Views 126 Replies 27 Participants Last post by  twendt
So I picked up a 2014 Ford Fiesta ST to play with. There are a bunch of reasons I did this so I'll just make a simple numbered list to help explain why.

1. I wanted a small lightweight car again (It's 27XXlbs)
2. I wanted to learn the Ford ECU
3. I wanted to track a small lightweight car
4. I wanted a small lightweight car that got great gas mileage for my commute

That's about it overall for the reasons. With over 20 years of driving Mitsubishis, Subarus and VW's I never ever ever ever thought I would own a Ford....

For some reason the Focus ST never really intrigued me. After reading all the press about the Fiesta ST, it did intrigue me, I went and test drove a bunch and I totally fell in love with the car. It really feels like something special, a Ford engineering baby.

I still own my current Evo, an Evo 10, for now. It's in a different league for sure, but I didn't buy the Fiesta ST to replace the Evo. So enough about that.

This thread will serve as a place to post my findings as I learn the car, the ECU, etc.

I come from a tuning background. I used to tune Mitsubishis professionally, mainly Evos. Most recently a 2005 Evo 8 MR for 10 years that was my personal project, that I tuned and tracked. It had 500hp on E85. I also had a 2010 Mitsubishi Lancer Sportback Ralliart that I also tweaked and tuned to 400hp on E85. As stated above still have my Evo 10, 400hp, also on E85. You can sense what's coming for the Fiesta ST then.

Initial photos, 100% stock minus upgraded wheels/tires.

2014 Ford Fiesta ST
Recaro Package
"Rado" wheel package (painted wheels and brake calipers)

Wheels replaced with Sparco Assetto Gara 17x7 +42 satin black
Tire replaced with Bridgestone Potenza S-04 205/45/17

See less See more
  • Like
Reactions: 5
1 - 5 of 127 Posts
Before you went with the Wilwood upgrades, what did you run for front pads? Where the heck can I find some better pads for the OEM brakes?
I have found several options for the rear but not the front, can anyone else shed some light on this for me?
Not looking for a 'track' pad as much a competent Autocross pad that I can use everyday... I used to use Hawk performance pads when I raced my MK3 Supra, they were loud but got the job done and I didn't need to replace them after every race. Would you say that the Porterfields fit that description or???
I tracked an MK3 Supra Turbo and plan to get the Fiesta on the track this year as well (about a 7 year hiatus for me too coincidentally), the platform seems to be so much better suited for Autocross (small tight track) versus an actual racetrack. That EVO must be a lot more fun since it has such longer legs than the FiST. Keep those pics coming along too, I like how you have modified both cars (clean, purposeful looks!)
1 - 5 of 127 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.