Ford Fiesta ST Forum banner
1 - 20 of 80 Posts

·
Registered
Joined
·
274 Posts
Discussion Starter · #1 ·
Hey there Tasca- I'm told you guys are the most competent OEM Ford parts folks to deal with for these cars, so I am confident that if anyone can help me out on this, its Tasca.

Ok. so, The new 1.0L 3cyl EcoBoost Fiesta sFe w/5MT features a belly pan. I've also seen similar pieces called splash guards or skid plates. However noone has been able to find a part number for it. Several guys are looking and I'm interested myself as I reckon my hwy econ may improve.

Thanks for your help!
 

·
Fiesta ST Network Sponsor
Joined
·
382 Posts
Well, I'll certainly try. I'm not sure this is it but I can't find anything else at the moment.

The part in the pic highlighted in green might be it, it only shows one side in the catalog but there's a left and right listed, see if this looks right to you.

 

·
Fiesta ST Network Sponsor
Joined
·
382 Posts
I have no clue, Ford restricts the catalog listings to specific markets so I can't see European listings and they can't see North American listings.
 

·
Registered
Joined
·
274 Posts
Discussion Starter · #5 ·
Random question but can you order european part numbers?

The green piece does indeed appear to be 1/2 of it. What material is it made of?

Also: what's the price on the ST Illuminated Door Sill kit for Fiesta thru Tasca? That, I know'll work, heh
 

·
Registered
Joined
·
1,459 Posts
Also: what's the price on the ST Illuminated Door Sill kit for Fiesta thru Tasca? That, I know'll work, heh
You may want to see the ST Illuminated Door Sills.
They are not anything like what is pictured.

Dave
 

·
Registered
Joined
·
1,459 Posts
I have a set.
I don't like them.
I will post a picture when I get home.


Dave
 

·
Fiesta ST Network Sponsor
Joined
·
382 Posts
Random question but can you order european part numbers?

The green piece does indeed appear to be 1/2 of it. What material is it made of?

Also: what's the price on the ST Illuminated Door Sill kit for Fiesta thru Tasca? That, I know'll work, heh
No european parts, sorry. I'm sure that undertray is some sort of black ABS plastic.

The sill plates are $150.15, odd that they changed the design midstream like that.

-Steve
 

·
Fiesta ST Network Sponsor
Joined
·
382 Posts
Right side AE8Z*115A74*A $100.43
Left side AE8Z*115A74*B $112.81

Not a clue on shipping at this point as I don't have dimensions.



.
 

·
Registered
Joined
·
52 Posts
$200 for a couple pieces of plastic? I don't have a Fiesta yet(it's supposedly in transit), but as a metal fabricator, I might just design a lightweight aluminum skid plate for it.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
1,459 Posts
$200 for a couple pieces of plastic? I don't have a Fiesta yet(it's supposedly in transit), but as a metal fabricator, I might just design a lightweight aluminum skid plate for it.
I too fabricate many of my own parts and have done so for years.

Just remember what they say.

NEVER trust a fabricator, they make shit up.


Dave
 

·
Registered
Joined
·
908 Posts
For class racing the SFE plastic might be allowable parts interchange but an aluminum undertray would probably knock you out of any stock class.

I'm tempted but even if you drive a lot, the payoff might take 4+ years.

It could boost top speed but I'm fairly sure I'll never get close to that at any time.
 
1 - 20 of 80 Posts
Top