Thanks for the update.
COBB Release - More Monitors and Performance Task Updates!
NEW ADVANCED ENGINE MONITORS:
We’ve added a slew of new data monitors for those pushing the envelope of performance with the Fiesta ST. Monitors such as Start of Injection, the injected amount of Fuel Mass, and Maximum Injection Angle are a small sample of what has been added. These new monitors will allow you to dive into the fuel system and milk it for every last drop. In addition to these monitors we have added an Advanced Monitors addendum to the Ford Monitor List which breaks down the enumeration of several crucial data monitors.
PERFORMANCE TASKS REVISED:
Those of you who were experiencing issues with the 0-60mph and 1/4mi Performance functions should now be able to get accurate readings. We have adjusted the task to use the average rear wheel speed which will greatly enhance the accuracy of these calculations. The vehicle settings file must be reset to use the new method of wheel speed input. To do this, navigate to the main menu and select the "->" icon, inside this menu will be a "Reset All Defaults" option. Once cleared you will need to setup the monitor preferences and re-configure any changes to the log list.
Update your firmware NOW to receive these enhancements!
Cheers,
The COBB Ford Expert Group
We’ve added a slew of new data monitors for those pushing the envelope of performance with the Fiesta ST. Monitors such as Start of Injection, the injected amount of Fuel Mass, and Maximum Injection Angle are a small sample of what has been added. These new monitors will allow you to dive into the fuel system and milk it for every last drop. In addition to these monitors we have added an Advanced Monitors addendum to the Ford Monitor List which breaks down the enumeration of several crucial data monitors.
PERFORMANCE TASKS REVISED:
Those of you who were experiencing issues with the 0-60mph and 1/4mi Performance functions should now be able to get accurate readings. We have adjusted the task to use the average rear wheel speed which will greatly enhance the accuracy of these calculations. The vehicle settings file must be reset to use the new method of wheel speed input. To do this, navigate to the main menu and select the "->" icon, inside this menu will be a "Reset All Defaults" option. Once cleared you will need to setup the monitor preferences and re-configure any changes to the log list.
Update your firmware NOW to receive these enhancements!
Cheers,
The COBB Ford Expert Group
1 - 1 of 11 Posts
1 - 1 of 11 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Ford Fiesta ST Forum
A forum community dedicated to Ford Fiesta ST owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Recommended Communities
