Ford Fiesta ST Forum banner

Code P061A

8274 Views 6 Replies 3 Participants Last post by  FaST
I have posted this on as well...

Hi guys I am currently running Cobb OTS Stage 1 91oct... I have the Cobb stage 1 power pack and ATP down pipe. After hard acceleration code P061A comes on. I am pretty sure that this code is putting my car into limp home mode... I know that the code is for a PCM error. The code resets itself every time the car is turned off but comes back on after hard acceleration. I have called Cobb customer service and they informed me it could be the down pipe because stage 1 isn't designed for a cattless down pipe. I am also only pushing around 19.5psi max and boost usually holds around 18psi. I am going to tighten my clamps soon. Just wondering if you guys had any ideas of what is causing the code to come on.... I emailed Ian at Cobb today... Hopefully he will have some answers.

P061A - Internal Control Module Torque Performance

Description:possible Causes:Indicates an error occurred in the powertrain control module (PCM). • Software incompatibility issue • Damaged PCM

Diagnostic Aids:

Verify the PCM is at the latest calibration level.

Sent from my iPhone using Tapatalk
See less See more
1 - 4 of 7 Posts
How would I fix this problem? I can't tell wether or not it's putting my car into limp mode or not. I'm still getting almost full boost when the code comes on. I was able to log a highway drive which during the code came on!

Sent from my iPhone using Tapatalk
I'm in touch with Braden at Cobb! He and Ian are being super helpful!

Sent from my iPhone using Tapatalk
I'm a full time student currently and cannot afford to buy a FMIC yet.... Soon hopefully!

Sent from my iPhone using Tapatalk
1 - 4 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.