Ford Fiesta ST Forum banner

Driver Window Auto-Up Not Working

1369 Views 3 Replies 2 Participants Last post by  RodMoe
Hello all. New member here. Got my 2014 FiST a few weeks ago. I installed the FSWERKS intake on it this evening. Part of the install was disconnecting the positive battery terminal. After I got the intake installed (and hooked the positive battery terminal back up), I took the car for a drive. I noticed that the auto-up on the driver window is no longer working. The auto-down still works however. The auto-up worked before the intake install/battery terminal disconnection. Any ideas on what might have happened? Any way to trouble shoot this before going to the dealer? Thanks!
1 - 2 of 4 Posts
Check your auto bounce back on page 72/73 of the 3rd printing of the owners manual after the battery is out you need to relearn that doo dad..
  • Like
Reactions: 4
You are Welcome
  • Like
Reactions: 1
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.