Ford Fiesta ST Forum banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
Right guys, we fitted a new engine to my 2013 Fiesta ST. We got it all up and running and well it came up with the engine malfunction light when it was given a bit of revs. I have a turbosmart bov on it and it wasn't working properly as it should. As far as i'm aware all vacuum hoses are connected with no holes or leaks just doesn't sound right but then we tried to move the car forward a few feet but it stalled and now won't start again. Any advice what i could look at too get it started again? Many thanks

Sent from my SM-G930F using Tapatalk
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.