Fiesta 2016 map intake issue

1395 Views 1 Reply 1 Participant Last post by Sil3nt611, Apr 18, 2016

Discussion Starter · Apr 17, 2016

Bought the map intake with the adapter for the 2016. Was almost done when the diagram on there website says the last ru ber tube off the t valve goes to plastic fitting. But it doesnt make sense because the plastic fitting was what went on the stock intake. Im hella confused on this really need some help. Please if anyone has a 2016 intake installed show me a picture so i can try to fix this.

Save

1 - 1 of 2 Posts

Sil3nt611

· #2 · Apr 18, 2016

Louis Bosch said:
Bought the map intake with the adapter for the 2016. Was almost done when the diagram on there website says the last ru ber tube off the t valve goes to plastic fitting. But it doesnt make sense because the plastic fitting was what went on the stock intake. Im hella confused on this really need some help. Please if anyone has a 2016 intake installed show me a picture so i can try to fix this.

I don't know the difference, but the 2016 intake is different than the '14-'15. So what you bought is probably only for '14-'15.

Save

1 - 1 of 2 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month