61 - 70 of 70 Posts
Maybe I can help you.
Dave
Okay .So Im assuming you can make me the over lays ? Or provide me with the information to get some ?
What is the easiest way to get them and what do I need to do in order to get some
Let me know
Thanks
AS listed above, I have some basic colors.Okay .So Im assuming you can make me the over lays ? Or provide me with the information to get some ?
What is the easiest way to get them and what do I need to do in order to get some
Let me know
Thanks
Let me know what you want as I will be making some up tomorrow.
I also hope to make a simple install instruction.
Please PM your request.
Dave
I put the ones together for my car because the local shops wanted way too much money.
In also wanted chrome script on the orange background.
You just can't print chrome and have it look correct.
I few of you have asked for me to make overlays and I have made these.
However for any more that I do the options will have to be limited to what works with what I have.
Next week I will go to my vinyl supplier and see what other/better colors I can get.
Here is what I have discovered.
The matte black that I have makes a good background but is very bad for the script.
Although I have made a couple, I will need to get a different matte black vinyl.
The process I use is to lay one layer over another.
This is kind of "Old School" but it does look good.
This process is NOT good at all for the steering wheel logo.
The script here is just too small.
The steering wheel will require a printed vinyl.
I have a cutter only not a printer.
Dave
In also wanted chrome script on the orange background.
You just can't print chrome and have it look correct.
I few of you have asked for me to make overlays and I have made these.
However for any more that I do the options will have to be limited to what works with what I have.
Next week I will go to my vinyl supplier and see what other/better colors I can get.
Here is what I have discovered.
The matte black that I have makes a good background but is very bad for the script.
Although I have made a couple, I will need to get a different matte black vinyl.
The process I use is to lay one layer over another.
This is kind of "Old School" but it does look good.
This process is NOT good at all for the steering wheel logo.
The script here is just too small.
The steering wheel will require a printed vinyl.
I have a cutter only not a printer.
Dave
Those that have been requested are now ready to mail.
Please PM your addresses.
Dave
Please PM your addresses.
Dave
D1JL, are you still making Ford emblems anymore? I have an MO FiST on the way and I want to do the two Fords on the exterior and maybe wheel center caps as well. If you are not doing it anymore, any tips would be welcome. Reply here or PM would be great. Thanks!
G
Looks awesome!They are two layer vinyl.
The orange is set within the chrome outer oval of the original badge,
The next chrome oval and Ford were laired on top.
No trouble at all just stick them on.
I like to use a 9 year vinyl for this type of application.
I have never had trouble with it lifting.
Dave
61 - 70 of 70 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Ford Fiesta ST Forum
A forum community dedicated to Ford Fiesta ST owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Recommended Communities
