Ford Fiesta ST Forum banner

OEM Front Coil Springs

843 Views 0 Replies 1 Participant Last post by  Methane Herder
I picked up a set of new OEM front coil springs to put on the new Koni's. They are ridiculously cheap, about 12$ each.
My question is do they have to be installed with a particular end up? The end with the part number tag has a slightly larger diameter turn and the coil spacing gets a little larger toward that end.
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.