OEM strut top hats part #'s?

razorlab said:

Anybody have part #'s for the OEM strut top hats with bearings, etc?
Looking to not have to disassemble my OEM struts, just want to bolt on new OEM top hats with bearings, etc to my coilovers.
Thanks in advance!

Click to expand...

Coilovers should come complete.
Coilover springs are usually smaller in diameter and therefore wouldn't fit the OE part anyway.


Dave

razorlab said:

Bilsteins use the OEM top units and I want a complete unit to unbolt and swap. There are your answers.
Not my first rodeo but I appreciate the concerns.

Click to expand...

If it is not your first rodeo as you say.
Maybe you could try a Ford dealer for Ford part numbers instead of forums.
Or do you need a phone number?

I would suggest that you call Steve at Tasca (800-598-1484) for the correct part numbers and the best prices.

However once you do get them installed, you could report back here.
We would love to know how, the install went, how the car rides, and preforms.
Oh, you could also post the part numbers.


Dave

Actually I have done this before.
I was just too lazy to look through my paperwork to find the part numbers.
So I figured you also were too lazy to call a dealer.

Yes, the non-ST and ST are the same parts.
Yes, Steve at Tasca will give you the best prices.
Don't forget to get the 6 nuts that hold the struts in.
They should be replaced but most important is you may drop one and never find it again.
I have experience there too.


Dave