Ford Fiesta ST Forum banner

OEM strut top hats part #'s?

8415 Views 21 Replies 9 Participants Last post by  [email protected]
Anybody have part #'s for the OEM strut top hats with bearings, etc?

Looking to not have to disassemble my OEM struts, just want to bolt on new OEM top hats with bearings, etc to my coilovers.

Thanks in advance!
1 - 2 of 22 Posts
Speaking of.....I put the Koni rear shocks on my ST so had to drill out the shaft hole in the top mount to fit, so thought I'd order a pair of backups when I remount the stock shocks. E-Bay had them for $42 each. Steve at Tasca had them for $9.93 each.

Guys!! Buy from Tasca! get the best service! Go online and you can get ALL of the suspension part numbers!!!! Takes about 35 seconds....
Next up is that 2011 SES 22 mm front bar for peanuts...

Luv ya Tasca!!
What is the ST front sway bar diameter?
Im looking to buy Koni srt.t struts with eibach springs combo and wanna buy new top hats for this setup. should I buy 6,8,9,10,11,12 and 13?
I would only get 10, 11 & 12. #13 can be reused, the koni will come with its own #6 and I doubt that #8 will work with the koni/ spring combo.
1 - 2 of 22 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.