Ford Fiesta ST Forum banner
1 - 8 of 8 Posts

· Registered
Joined
·
38 Posts
Discussion Starter · #1 ·
Hey guys,

So I'm about to pick up my MO FiST and I have a couple of ideas in mind to customize the exterior. I plan to paint the center hood black (or use a decal) , put 25% tint, and add a black side stripe (of increasing height). Would someone please use photoshop to create a mockup from a couple of different angles? I can't tell if the pieces fit well together. I attached a pic of the hood and side stripes. Thanks for the help guys, and I'm open to any ideas or suggestions!
 

Attachments

· Registered
Joined
·
149 Posts
Here is a mock up I created for myself.

http://fiestast.net/threads/im-looking-to-paint-my-st-suggestions.1601/

To be clear, you want:

1.) 25% window tint
2.) Black hood center stripe, as in photo provided
3.) Side stripe, as in photo provided (Possible taller)

It's a fair bit of work to do even 1 mock up. Can you provide me with a single photo you would like to see the mock up on?

I'll see what I can do.
 

· Registered
Joined
·
149 Posts
Pick a photo and post it here, I'll see what I can do with it.
 

· Registered
Joined
·
149 Posts
For the record, I am no expert! (Side stripe turned out like crap)

However, this is what I came up with, I hope this is what you had in mind.

1.) Original Photo
2.) First Mock
3.) Second Mock (Emphasizes the window tint)




Let me know if you want any changes done.
 

· Registered
Joined
·
149 Posts
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top