[marc89gti]

Just wondering if anyone has bought one of these kits for there FiST? Looks like one of the better OCC kits out there. I bought the Mishimoto OCC and while its catching water/oil/gas I'm not convinced its catching all the blow by as when I check the clean side hose there is always some oil on that side. They have a video of installing a system on Focus ST and large amount of blow by and coking the valve seats. From what I've read sounds like the 2.0L engine is a lot worse for blow by compared to the 1.6L engine.

http://www.rxspeedworks.com/product/catch-can-kits/
http://www.rxspeedworks.com/rx-catch-can/
http://www.rxspeedworks.com/faq/

 

[marc89gti]

Doing some more research on this can it turns out for sometime they have been selling a Chinese knock off version that was glued together on the bottom and comes apart when freezing. http://www.f150online.com/forums/v6...rx-catchcan-system-results-after-install.html Further down the post will see pictures of the can that expanded when the contents froze.
Looks like it was a good product but then either ownership changed or something?

Sent from my Nexus 9 using Tapatalk

 

[marc89gti]

Doing more research looks this guy Tracy (also called "tuner boost")you will see in videos is a real con artist and has been kicked out of many forums and has many different OCC's made under different names all of cheap quality
http://www.focusst.org/forum/showthread.php?t=34234
I guess stay away from this product, sounds like a headache even though it looks like some people have had success with this.
Sent from my Nexus 9 using Tapatalk

 

[KKaWing]

Depending on how you feel about emissions... Look into the Damond Motorsports setup with the VTA option. It includes a check valve between the can and the intake manifold standard, and the VTA option also has a check valve between the can and the "vent" filter so it only expels gasses and not suck it in.