[reddog99]

And if you want to spend $100 less than that for a boost reading, look into an Ultragage.

I like the Scangage and have two of them, but I think I like the larger display on the Ultragage that I use in the ST.

 

[reddog99]

Yes, if you have a new model Ultraguage.
The original versions prohibit newer model car's computers from sleeping properly and will run down the battery overnight.

My original Ultraguage worked fine on my 2011 Fiesta, but I had to buy a new version for the ST.

 

[reddog99]

Yes, v1.2 is the latest & greatest.

 

[reddog99]

I don't think oil temp is available. These gauges can only display whatever is provided by the computer, and the computer apparently doesn't care how hot the oil is.

From the manual, available on-line:
Page Refresh rate
Min 0.3 sec., Default 1.0 sec., Max 2 sec.

 

[reddog99]

I looked at the available gages on mine today and oil temp is not listed.
It would be nice to see it, but since the oil passes thru a intercooler heat exchanger (under the oil filter), I would expect the oil temps to follow the coolant temps somewhat. Firesail, can you verify this??

 

[reddog99]

Judging from the oil temp, it looks as if the engine isn't completely warmed up.
Does the oil temp eventually reach the same temp as the coolant???

 

[reddog99]

Ran down the battery of which one? The EL327, the phone, or the car?