Ford Fiesta ST Forum banner

tpms question

2K views 7 replies 4 participants last post by  doudou 
#1 ·
#4 ·
The sensor is either attached via a band (big ass hose clamp) or is part of the valve stem. The Fiesta uses the sensor/valve stem combo. The only clearence issues would be if the wheel geometry won't allow enough room for the sensor to fit around the valve stem hole. If that is the case, a band style would need to be used.
 
#7 ·
I get just the Light and a warning on the MFT display the warning only lasts like 5 seconds and the light on the dash blinks for a bit then stays on solid. No dings at start or during .. (as I park my car near my summer tires so tpms resets itself in my garage) So I have to drive more than 15 minutes or so before it comes back...
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top