width of the hatchback storage area?

6836 Views 4 Replies 5 Participants Last post by kvetcha, Sep 24, 2013

nxGuy

Discussion Starter · Sep 24, 2013

Could someone that has a ST please measure the width of the load area of the hatch?

Several months ago, I measured a FoST and a normal Fiesta hatch, and looking at the numbers later (they were basically the same), I am worried I got distracted and measured a non-ST Focus instead of a Fiesta.

In my current NX2000, the open space is
38" wide (at the narrowest spot (between the wheel wells))
52" length (from the back of the front seats to the back)
18" high (at the lowest spot at the back where the hatch closes)

thanks a lot!

-Peter

Save

1 - 5 of 5 Posts

Stevelach

· #2 · Sep 24, 2013

Hey Peter - here are my measurements.

39" wide at the narrow spot
52" long from the back of my drivers seat (3/4 adjusted full rear)
16" high at the lowest spot with the load floor in the upper position

Save

swansong

· #3 · Sep 24, 2013

Here's my ZX3 SVT with the Audiophile package for reference.
I cannot recall if my height measurement was from the lowest spot on the roof or the highest. I'm thinking highest.
Surprising how close the dimensions are, I really would not have guessed that. Looks like the Fiesta only gives up vertical space.

See less See more

Save

EvoNiner

· #4 · Sep 24, 2013

I must say having both of them, I do think there is plainly just less space in the FiST. The hatch closes sharper, and the roof is lower? Also since the seats don't fold flat it also is different.

Sent from my iPhone using Tapatalk - now Free

Save

kvetcha

· #5 · Sep 24, 2013

EvoNiner said:
I must say having both of them, I do think there is plainly just less space in the FiST. The hatch closes sharper, and the roof is lower? Also since the seats don't fold flat it also is different.

Sent from my iPhone using Tapatalk - now Free

Yeah, not even CLOSE to flat.

Save

1 - 5 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month